PCB Reverse, PCB Clone,MCU Reverse,Chip Crack,PCB Manufacturing, PCB Designing, PCB Cloning, PCB fabrication, PCB Rework,PCB Assembly
phone 086-0755-25106017 && 086-0755-25106019
e-mailpcbmcu@hetelltech.com skype:hetell0755

pic18f252 crack

Catagories: MICROCHIP MCU Crack | Tags: IC code extracion, ic crack, mcu attack, Microchip, PIC18F252

For PIC18F252 MCU Code Extraction, PIC18F252 IC Crack, PIC18F252 MCU Break, and other Microchip IC Attack. we use high-end technologies and the latest laboratory equipment to perfect the technique of microcontroller code recovering (extracting the code from locked microcontrollers). We had analyzed a wide variety of chip types which are commonly used in different industries, which enable us to open the chips and extract the program inside with quick speed and accuracy, and thus help lauching your project quicker and cheaper.

This powerful 10 MIPS (100 nanosecond instruction execution) yet easy-to-program (only 77 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip¡¯s powerful PIC? architecture into an 28-pin package and is upwards compatible with the PIC16C5X, PIC12CXXX, PIC16CXX and PIC17CXX devices and thus providing a seamless migration path of software code to higher levels of hardware integration. The PIC18F252 features a ¡®C¡¯ compiler friendly development environment, 256 bytes of EEPROM, Self-programming, an ICD, 2 capture/compare/PWM functions, 5 channels of 10-bit Analog-to-Digital (A/D) converter, the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI?) or the 2-wire Inter-Integrated Circuit (I?C?) bus and Addressable Universal Asynchronous Receiver Transmitter (AUSART). All of these features make it ideal for manufacturing equipment, instrumentation and monitoring, data acquisition, power conditioning, environmental monitoring, telecom and.

Features of PIC18F252:

CPU

Up to 10 MIPS performance

?C compiler optimized RISC architecture

?8 x 8 Single Cycle Hardware Multiply

System

Internal oscillator support 31 kHz to 8 MHz

?Fail-Safe Clock Monitor ¨C allows safe shutdown if clock fails

?Watchdog Timer with separate RC oscillator

?Wide operating Voltage range; 2.0V to 5.5V

nanoWatt Power Managed Modes

Run, Idle and Sleep modes

?Idle mode currents down to 5.8uA typical

?Sleep mode currents down to 0.1uA typical

Analog Features

10-bit ADC, 10 channels, 100K samples per second

?Programmable Low Voltage Detection Module

?Programmable Brown-out Reset module

?Two Analog comparators with input multiplexing

Peripherals

Master Synchronous Serial Port supports SPI ? and I2C? Master and Slave Mode

?EUSART module including LIN bus support

?Four Timer Modules

?Up to 2 PWM outputs

?Up to 2 Capture / Compare

If you need to read the code from the protected chip PIC18F252. we can help you to crack the MCU and extract the code from PIC18F252 succesfully. Welcome to contact us by Email or Skype.

Email: pcbhetell@gmail.com

MSN:hetell@hotmail.com

Copyright © 2008 - 2022PCB Assembly
by : Hetell